TES Instruments Distributor Malaysia
Innovational logging feature (7000) to memorize all of measurements from the work place RS-232 interface with valued software 4,000M W /V Reding/10,000M W analog indication Backlight illumination 3-3/4 Digital LCD, 4000Count Auto Range for Mega Ohm range 50 segments Log Scaled Analog Display Easy to carry testing package Tests insulation at rated voltage into a 1mA load 200mA short circuit continuity current Meet VED0413 Auto discharge
Large LCD with analog bar graph and digital display. 250V, 500V, 1000V output voltage for insulation M Ω testing. 4000M Ω insulation testing with automatically switch to voltage measurement. Lo Ω function for testing connections. Autodischarge of capacitive voltage charges. Last reading HOLD display. AC/DC voltage measurement up to 1000V. Manual data memory and read function (9 sets). Meets EN61557 and IEC1010-1, CAT III 1000V. Size : 235(L)x116(W)x54(H)mm (9.3"Lx4.6"Wx2.1"H)
Test a wide range of UTP cables such as 10Base T , 100Base Tx , 10Base 2 (Coax), 356A , TIA-568A , TIA-568B, etc. Can tests for wiring faults such as open, short , reversed , crossed and split wires. Can identify up to 4 different cables at one end by provided remote identifiers. Double digital 14-segment LED and 4 pair LEDs clearly display the fault status. Provided over voltage (max.56V) protection to prevent damage frommiss connecting to live circuit of networking. Simple and effective use. Auto power off
Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables and test all category UTP cables and hardware. Verify end-to-end connectivity per EIA/TIA 568 wiring standard. Detects wiring problems : Opens, Shorts, miswires (Crossed, Reversed, Split pair). Locates wiring/connection errors (distance to the open or shout) Measures cable length Easy to use only : One button to select the test and two lines characters LCD display. Low battery, Auto power off, long battery life (60 hours continuous)
Test Condition Without Shutting Down Battery. Simultaneously Measure Battery Resistance, Voltage, Current, Temperature. Auto-hold and Auto-data storage. Comparator Function. Rates Conditions as Pass, Warning, or Fail. Memory and Read Function Compact and Lightweight. USB PC Interface Storage Battery Systems Battery Capacity Testers, Check battery condition in seconds, with the battery in service!
Test Condition Without Shutting Down Battery. Simultaneously Measure Battery Resistance, Voltage. Comparator Function. Rates Conditions as Pass, Warning, or Fail. Memory and Read Function Compact and Lightweight. RS232 PC Interface
CO 2 : 0 ~ 6,000 ppm range, Diffusion sampling mode. Three LCD Display for CO 2 , %RH Humidity and Air Temperature. Maintenance free dual wavelength NDIR infrared CO 2 sensor (non-dispersive infrared). Continuous or manual data logging (20,000 sets). Data hold & Maximum / Minimum with Time stamp. Data Memory and READ function. Alarm and Time setting. RS-232 function / Software. Backlight display function. Simple and safe to use.