• Filter
Category: Cable Testers
Created on: 14 November 2013

Cable Expert (Model No.: CE-1000) NanoTronix Cable Expert (Model No.: CE-1000) is the all-in-one and easy-to-use network qualification unit measuring logical network performance and physical condition of network cables. It allows network engineers to install and maintain efficiently local area networks (LAN) with 10BASE-T and 100BASE-TX based on the Ethernet protocol. For measuring logical network performance, it provides the round-trip time (RTT) testing to measure network speed under dynamic and static configuration protocol and the IP scanning to show the information on all the terminals connected into the local network. It can also evaluate the capability of link partners such as supported network speed (10BASE-T or 100BASE-TX) and duplexity (half- or full- duplex). The device provides the physical information of the LAN cable under test such as cable length, faulty positions (open or short) and wire map (open, short, split, crossed and reversed). In particular, with the novel high-resolution graphic TDR (Time-Domain Reflectometer) and TDX (Time-Domain Crosstalk), it is possible for the users to locate faulty positions along the cable up to 500 meters. These TDR and TDX can...

Category: Cable Testers
Created on: 14 November 2013

Made in Korea

Created on: 19 May 2013

Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution; 0.1/1 Accuracy: 3%n or 5um

Created on: 19 May 2013

NIC0007 CM-8801FNV2 NEW DIGITAL PAINT COATING THICKNESS GAUGE ON FERROUS/NON-FERROUS BASED METALS Applications: Automotive Trade This is a great tool for car dealerships, used car buyers, appraisers, insurance agents, body shops and collision centers. It will allow you to measure the paint thickness and to identify parts of the car that might have been repaired and repainted. This might indicate previous, unreported accidents which impact the value of an used car, minivan or truck. Industrial and Manufacturing Check if the protective coating, powdercoat or paint on machine parts, buildings or on incoming raw material is of the correct thickness. Features: Factory calibrated, measures precisely right out of the box Simple switch between mils or microns Large LCD flip-display, easy to read in any position Accurate readout in just 1 second Memory records the last 10 measurements Specifications: Measurement Range 0 - 40 mil   0 - 1000 µm (micron) Accuracy ± (0.1 mils + 3%)   ± (2 µm + 3%) Memory 10 measurements Weight 2.6 oz / 72g Dimensions 4.2 x 1.8 x 1.0 "...

Created on: 19 May 2013

This Coating Thickness Meter  is an ideal gauge for automotive and painting applications.It uses magnetic induction and eddy current principle to measure thickness of magnetic and non-magnetic surface and detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous, F) or an insulating coating on a non-magnetic conductive substrate (non-ferrous, NF).

Created on: 19 May 2013

DESCRIPTION This compact gauge can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals. The internal probe can work on both principles, magnetic induction and the eddy currents. The probe can automatically detect the substrates type (Magnetic or not), and calculate the coating thickness and display it fast. There are five data groups, and readings will be automatically stored to memory for general groups (Not for direct group). Each group has individual statistics, alarm limit settings and calibration. User can recall and delete specified readings easily. User does all operations via standard menu so easily. User can press the CAL button to start calibration freely. FEATURES 1. 128*128 dot matrix LCD display, standard menu operations; 2. Two measure mode: single and continuous; 3. Two group mode: direct (DIR) and general(GEN), readings will be lost when power off in direct mode, and not be lost in general mode. 80 readings can be stored for each group; 4. Zero point calibration and multi-point calibration(up to 4 points) for each...

Created on: 18 May 2013

KKInstruments hold the widest range of temperature sensors for your applications. Most of our sensors are made in Japan and Germany.