Calibrators

  • Filter
Category: Calibrators
Created on: 14 February 2014

A large display and simple, pushbutton interface for ease of use. Simultaneous mA and % readout for quick, easy interpretation of readings. mA accuracy of 0.02% Push button 25% steps for fast, easy linearity checks. Save time over traditional knob type controls. "Span Check" for fast confirmation of zero and span. Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests. 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM. Single 9V battery that is easily changed. 0 - 20 mA or 4 - 20 mA default start up modes.

Category: Calibrators
Created on: 14 February 2014

Large display and simple, quick-click interface for easy one-handed operation Simultaneous mA and % readout for quick, easy, interpretation of readings mA accuracy of 0.015%, superior to other loop calibrators in this price range 1µA resolution for mA source, simulate and measure Push button 25% steps for fast, easy linearity checks 0-100% "span check" for fast confirmation of zeroand span Measures V dc to 28 V Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM Single 9 V battery that is easily changed 0-20 mA or 4-20 mA default start up modes Innovative output adjustment dial with 1 µAand 100 µA resolution HART™ mode connects 250 W resistor in serieswith 24 V loop for compatibility with HART communicators. Also available Fluke 707EX Intrinsically safe model

Category: Calibrators
Created on: 14 February 2014

ATEX Intrinsic Safe Certification for use in classified areas. Large display and simple, quick-click push rotary button for easy one-handed operation Simultaneous mA and % readout for quick, easy, interpretation of readings mA accuracy of 0.015 %, superior to other loop calibrators 1 µA resolution for mA source, simulate and measure Push button with 25 % steps for fast, easy linearity checks 0-100 % "span check" for fast confirmation of zero and span Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests Internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM Measures V dc to 28 V Single 9 V battery that is easily changed Innovative output adjustment dial with 1µA and 100 µA resolution HART® compatible resistance is connected in series with the loop supply for compatibility with HART communicators

Category: Calibrators
Created on: 14 February 2014

Measure temperature from RTD output Simulate RTD output Operates with seven types of RTDs Measure additional RTDs using Ohms measurement function Simulate additional RTDs using Ohms source function °F or °C selectable Four shrouded banana jacks Compatible with Rosemount® pulsed RTD transmitters(pulses > 100ms)

Category: Calibrators
Created on: 14 February 2014

Measure temperature from Thermocouple output Simulate Thermocouple output Operable with nine types of thermocouples Calibrate linear Thermocouple transmitter with mV source function Selectable °F or °C Thermocouple mini-jack termination

Category: Calibrators
Created on: 14 February 2014

Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution Measure voltage output process signals from PLCs, transmitters Source or simulate 24 mA loop current Source voltage to 100 mV or 10V 24V loop supply with simultaneous current measurement Enhanced voltage and current measure and source accuracy Improved battery life 250 ohm HART resistor with loop power Holster features test lead storage Compatible with toolpack magnetic hanging system Step and linear ramp output function Configurable zero and span settings

Category: Calibrators
Created on: 14 February 2014

General Features: Measure pressure and vacuum to 0.05% of full scale with internal 30 or 100 psig sensor 1/8 NPT pressure fitting Compatible with non-corrosive gasses and liquids Measure pressure to 10,000 psi/69 mPa using one of 29 Fluke 700Pxx Pressure Modules Measure mA with 0.025% accuracy and 0.001 mA resolution, while providing 24 volt loop power New built-in pressure switch test feature Min/Max/Hold functions Fluke 718 Features: Built-in pressure/vacuum hand pump, with vernier and bleed valve Pressure and vacuum measurement to 0.05% of full span, using an internal pressure sensor (dry air only)

Category: Calibrators
Created on: 14 February 2014

ATEX II 1G EEx ia IIC T4 Compliant Built-in pressure / vacuum hand pump, with fine adjust vernier and bleed valve Pressure measurement to 0.05% of full span, using an internal pressure sensor Pressure measurement to 200 bar using any of eight intrinsically safe Fluke 700PEx Pressure Modules Wide range of selectable measurement units for pressure Current measurement with 0.02% accuracy and 0.001 mA resolution Pressure switch test function Min-Max Hold functions Simple, push-button user interface Rugged and reliable, ideal for field use