• Filter
Created on: 18 December 2013

DH-10C is designed to measure specific gravity of electrolytic solution of a lead storage battery with easy operation. Taking measurements with DH-10C requires absorption of sample from the tip of nozzle and press "START" key. Right after the oparation, the temperature compensated specific gravity of dilute sulfuric acid is displayed on the screen. Display of temperature " Celsius" and specific gravity can be selected by pressing "SELECT" key.

Created on: 23 April 2014

Product Description: The Air Ion Counter is a handheld meter designed to measure ion density-- the number of ions per cubic centimeter (ions/cc) in air. It measures this number separately for positive and negative ions (+ and - ions are usually present simultaneously). This instrument is a true ion density meter, based on a Gerdien Tube (Gerdien Condenser) design, and it contains a fan which pulls air through the meter at a calibrated rate. The standard model measures up to 2 million ions/cc (for comparison, outdoor air typically has 100 to 1000 ions/cc, both + and -). The 2 million range is sufficient for almost all situations except for measuring very close to electric ionizers or strong radioactive sources. For these applications, models with ranges of 20 million and 200 million ions/cc are also available. (Range can be specified on the checkout page; all three ranges are $470.) Output Description: A plug can be inserted in the left side of the meter to monitor the output, which is a slowly-changing analog voltage. This is a stereo phone plug identical to the plug on small headphones in which the ground has been cut. An output of +1.999 volts (or -1.999) represents...

Category: Test-leads
Created on: 14 August 2015

● Wire : PVC UL 1803 / 18AWG.     length : 1100±30mm    Out diameter : 3.50mm    Temperature tolerance range : -40ºC~105ºC    Braid copper wires : 64 / 0.12mm● Terminal :    (1) Single test plug for 2 test leads.    (2) Single test plug for easier operation.● Rating :    EN 61010-031:2002 + A1:2008    CAT III 1000V 10A / CAT IV 600V 10A

Created on: 26 May 2013

ATA0028B- Ultra-light Digital Brix Refractometer.Temperature/Brix readings in 3 seconds for all products.

Created on: 23 October 2014

PAL-BX/RI has dual scales of Brix full range : Brix 0.0 to 93.0%, high measurement accuracy : Brix ±0.1% and Refractive Index (resolution 0.0001). RI and measurement temperature will continuously scroll across the display. The PAL-BX/RI works perfectly for measuring almost any sample.

Created on: 20 October 2014

Since the measurement range of PAL-2 is Brix 45.0 - 93.0%, it can measure various high concentration samples such as jam, marmalade, jelly, honey and concentrated juice.The International Protection class of PAL-2 is IP65, so it can clean thick samples under running water.When boiling jam or marmalade are measured, the PAL-2 gives steady measurement values as the measurement is repeated for a few times.It is very useful since "zero-setting" (calibration) can be done with water.The feature of PAL-1 are fully covered by NEW PAL-2.

Created on: 30 January 2014

The AVS150 is a complete system used to perform autoclave validations. The AVS150 consists of a N.I.S.T. traceable HiTemp150 data logger, an IP68 extended range thermal shield, an IFC200 USB cable package and MadgeTechs Secure Software and IQ/OQ/PQ validation protocols, providing tools to users to assist with FDA 21 CFR Part 11 compliance. For larger size autoclaves or mapping projects, the AVS150-5, includes five HiTemp150s and five thermal shields. The HiTemp150 is completely submersible and can measure temperatures up to 150°C. The 2" rigid probe provides a fast response time and can record readings as fast as once per second. The HiTemp150 can be used in each autoclave cycle for verification and to provide data for validation. When used with the thermal shield the device can withstand up to 250°C (time dependent).   MadgeTech's Secure Software provides data in graphical and tabular form, and provides a summary and statistical report of the data. The software also features sterilization calculations to determine the F0 value. Furthermore the software allows for different user levels and logins, electronic signatures, an audit trail and a secure data file to stand up...

Created on: 23 October 2014

NEW PAL Series, PAL-Pâtissier debut for pâtissiers. PAL-Pâtissier has dual scale of Brix and Baume, this is ideal refractometer for cooking sweets. Wide range of 0.0-85.0 Brix can be measured.